I am a mechanical engineer and have worked in maintenance in the private sector for eight years. Most of what I write on this site comes from there: failures I run into in the field, and notes on machine elements and maintenance management.
The posts roughly fall under four headings:
- Engineering — selection, installation and failure signs of machine elements and systems such as bearings, bolts and tightening torque, belts and pulleys, chains, couplings, pumps, gearboxes, hydraulics and compressed air; with dimensions and tables.
- Maintenance Management — building a maintenance plan, root cause analysis, MTBF, MTTR and OEE, spare parts inventory, predictive maintenance and the move to digital maintenance.
- Occupational Safety — lockout-tagout (LOTO), periodic inspections and working at height.
- Technology — using Android and Linux, backups, account security and small automations; mostly notes on solving a problem I ran into myself.
I have also gathered the calculations I often do in the field on the calculators page: tap drill and thread, cutting speed and spindle speed, pulley and gear speed, motor current and hydraulic cylinder.
Outside work I develop software. I have collected the software I have built — a maintenance management system (BYS), the Prayer Times app, the VCF → Excel converter and others — on the projects page; you can reach the source code of some of them from there.
Some of the posts here are notes to myself: a book I read, a piece of information I found useful, a subject I have been thinking about. Others are things I thought were worth sharing; if they help someone, that is enough. When I write my own opinion in a post, I try to cite the sources I rely on.
If you spotted a mistake or something caught your attention, you can write to me from the contact page.